BRG · Assembly guide
Logitech Brake Elastomer Mod
Logitech pedal set
Assembly video
The same assembly video applies to all supported models and versions.
Open the pedal set
1. Remove the pedals and the fourteen silver screws in the back securing the plastic cover.
2. Remove the plastic cover.
Replace the brake spring
3. Remove the two screws securing the brake pedal.
4. Remove the nut and the large silver screw from the brake pedal.
5. Replace the original silver spring with the BRG Brake Mod.
Reassemble the pedal set
6. Refit the large silver screw and nut, then the two brake pedal retaining screws.
7. Refit the plastic cover and its fourteen silver screws.
Important notes
- Check that the pedal moves correctly and all fixings are secure. Do not overtighten the screws.
BRG · Your next upgrade
Ready for your next upgrade?
Get 20% off eligible products with code BRG20.
BRG20
Valid on selected collections. Cannot be combined with other discounts.
Explore the collection →